ERROR=0, EMPTY=0, DFEN=0
I2C Status register 2
EMPTY | Empty flag 0 (0): Tx or Rx buffer is not empty and cannot be written to, that is new data cannot be loaded into the buffer. 1 (1): Tx or Rx buffer is empty and can be written to, that is new data can be loaded into the buffer. |
ERROR | Error flag 0 (0): The buffer is not full and all write/read operations have no errors. 1 (1): There are 3 or more write/read errors during the data transfer phase (when the Empty flag is not set and the buffer is busy). |
DFEN | Double Buffer Enable 0 (0): Disables the double buffer mode; clock stretch is enabled. 1 (1): Enables the double buffer mode; clock stretch is disabled. In the slave mode, the I2C will not hold bus between data transfers. |